Fractional Flow Reserve (FFR / iFR)

What is Fractional Flow Reserve (FFR / iFR)?

Fractional Flow Reserve (FFR) and Instantaneous Wave-Free Ratio (iFR) are advanced diagnostic methods used during coronary angiography. These techniques are used to determine whether a narrowing in a coronary artery actually impairs blood flow to the heart muscle.

In other words, FFR and iFR measure not just how narrow the vessel is, but how significant that narrowing is for the heart.

This allows for a more accurate determination of which blockages require a stent or intervention, and which can be managed with medication.

Is Every Narrowing in Coronary Angiography Equally Important?

No.

Not every vascular narrowing seen on a coronary angiography causes a severe impairment in blood supply to the heart muscle.

For example:

  • Some narrowings between 50% and 70% may be significant.
  • Conversely, some narrowings close to 70% may cause fewer problems than expected.

It may not always be possible to make the right decision just by looking at the visual image.

Therefore, physiological assessment methods such as FFR and iFR have been developed.

What is FFR?

FFR (Fractional Flow Reserve) is a method that evaluates how much a stenosis affects blood flow by using pressure measurements inside the vessel.

During an FFR procedure:

  • The pressure before the stenosis
  • The pressure after the stenosis

are measured and compared.

The resulting value shows how functionally narrowed the vessel is.

How is FFR Calculated?

The FFR value is calculated as:

FFR = Pressure After Stenosis / Pressure Before Stenosis

In a normal vessel, this value is approximately 1.0.

As the severity of the stenosis increases, the value decreases.

Generally Accepted Values

  • FFR > 0.80 → The stenosis generally does not require intervention.
  • FFR ≤ 0.80 → The stenosis may be impairing blood flow to the heart muscle and treatment may be required.

The decision is always evaluated in conjunction with the patient’s clinical status.

What is iFR?

iFR (Instantaneous Wave-Free Ratio) is a newer technology that works similarly to FFR.

Its main difference is:

  • It does not require the use of medications to dilate the blood vessels.

Therefore, the procedure:

  • Can take less time.
  • May be more comfortable for the patient.

How Does iFR Work?

Measurements are taken during a specific time window in the heart’s relaxation phase when blood flow is naturally most stable.

Thanks to this measurement:

  • Pressures before and after the stenosis are compared.
  • The functional significance of the stenosis is determined.

How are iFR Results Interpreted?

In general:

  • iFR > 0.89 → Intervention may not be necessary.
  • iFR ≤ 0.89 → The stenosis may be significant and treatment can be considered.

The final decision is made by the cardiologist along with clinical findings.

Why are FFR and iFR Important?

Not every narrowing seen on an angiogram requires a stent.

Thanks to FFR and iFR:

  • Unnecessary stent placements can be prevented.
  • Truly significant blockages can be identified.
  • More accurate treatment decisions can be made.
  • Long-term outcomes can be improved.

In Which Patients Are FFR or iFR Used?

They are particularly preferred in the following cases:

Moderate Stenosis

Lesions ranging between 40% and 80% whose significance is uncertain.

Multi-Vessel Disease

To determine which vessel is responsible for the symptoms.

Left Main Coronary Artery Stenosis

To help make intervention decisions in certain patients.

Patients Who Have Previously Received Stents

To evaluate whether restenosis has developed.

How Are FFR and iFR Procedures Performed?

The procedure is performed during a coronary angiography.

  1. Imaging the Vessel

The suspicious stenosis is identified via angiography.

  1. Inserting the Pressure Wire

A special pressure-sensing wire, thinner than a strand of hair, is advanced into the vessel.

  1. Taking Measurements

FFR or iFR values are calculated.

  1. Deciding on Treatment

Depending on the results:

  • Medical therapy
  • Stent placement
  • Surgical options

are evaluated.

What is the Difference Between FFR and iFR?

Feature

FFR

iFR

Pressure measurement

Yes

Yes

Requires vasodilator medication

Yes

No

Procedure duration

Slightly longer

Shorter

Patient comfort

Good

Higher

Reliability

Very high

Very high

Both methods are recommended in international guidelines today.

Why is a Vasodilator Medication Used?

A medication called adenosine is generally used during FFR.

This medication:

  • Maximally dilates the coronary arteries.
  • Increases blood flow.
  • Allows for the measurement of the true impact of the stenosis.

The effect of the medication is short-lived and quickly wears off after the procedure.

Is a Stent Placed After FFR or iFR?

Not always.

Based on the measurement result:

If a Significant Stenosis is Detected

  • A stent may be placed.
  • Other interventions can be planned if necessary.

If No Significant Stenosis is Detected

  • Medical management and follow-up may be preferred.

This approach reduces unnecessary stent procedures.

What are the Advantages of FFR and iFR?

Ensures More Accurate Decision-Making

Evaluations are based on actual blood flow rather than just visuals.

Can Prevent Unnecessary Stents

It demonstrates that not every narrowing requires treatment.

Can Enhance Patient Safety

Unnecessary interventions can be avoided.

Can Improve Long-Term Outcomes

Scientific studies have shown the benefits of these methods.

Are FFR and iFR Safe?

Yes.

They are very safe methods when performed in experienced centers.

Complication rates are extremely low.

Rarely:

  • Transient arrhythmias
  • Vascular spasm
  • Issues related to wire passage

may be observed.

Frequently Asked Questions

Are FFR and iFR the same thing as angiography?

No. Angiography shows the image of the vessel, while FFR and iFR measure the functional significance of the narrowing.

Is FFR a painful procedure?

No. Pain is generally not felt during the measurement.

What happens if the FFR result is low?

This condition may indicate that the stenosis impairs blood flow to the heart muscle, and a stent or other treatments may be considered.

Why is iFR considered a newer method?

Because it allows measurements to be taken without the need for vasodilator medications.

Are FFR or iFR required in every coronary angiography?

No. They are especially used in moderate stenoses where the significance is uncertain.

Conclusion

Fractional Flow Reserve (FFR) and Instantaneous Wave-Free Ratio (iFR) are advanced diagnostic methods that evaluate not just the appearance of coronary stenoses, but their true impact on the heart muscle. Thanks to these technologies, it can be more accurately determined which vascular narrowings truly require treatment. Capable of reducing unnecessary stent procedures and aiding in personalized treatment planning, FFR and iFR stand among the most important decision-making tools in modern interventional cardiology today.

 

This content is intended for general informational purposes only. Diagnostic and treatment decisions must be individually evaluated by a specialist cardiologist.

TR|EN